WL2082i
Sistema de instalación Line Array
Este producto ha sido descontinuado. Consulte con su representante de ventas regional de Q-SYS la disponibilidad de existencias restantes.
Considera los altavoces de la Serie PL come un sustituto:
- PL-LA: Arreglos lineales pasivos para instalaciones fijas diseñados para ofrecer un sonido premium, ideales para espacios de tamaño pequeño y medio
- PL-SUB: Subwoofers pasivos de tamaño compacto para instalaciones fijas y con gabinetes reforzados para soportar las inclemencias del tiempo, ideales para una amplia variedad de aplicaciones
Características
- El diseño optimizado para la instalación ofrece un desempeño de line array accesible y absoluto a una variedad más amplia de recintos
- Apariencia compacta y atractiva, disponible en blanco y negro, armoniza con cualquier entorno de instalación
- Amplia cobertura horizontal de 140°
- Sistema de suspensión económico y fácil de instalar con gran capacidad de ajuste de line array
| SPECIFICATIONS | WL2082-i | |||||||||||||||
| Configuration | 2½ way, biamp or triamp | |||||||||||||||
| Transducers High Frequency Low Frequency | Dual 50 W 8Ω 1-inch exit, 1.75-inch titanium diaphragm, neodymium magnet assembly Dual 200 W 16Ω 8-inch woofers, 2-inch voice coils, neodymium magnet assemblies, weather resistant cone | |||||||||||||||
| Frequency Response (±3 dB) | 80 Hz - 20 kHz | |||||||||||||||
| Frequency Range (-10 dB) | 68 Hz - 22 kHz | |||||||||||||||
| Nominal Impedance | HF: 16Ω LF biamp mode: 8Ω LF triamp mode: 16Ω (×2) | |||||||||||||||
| Sensitivity | HF: 106 dB LF: 97 dB (4 V @ 1 m) | |||||||||||||||
| Continuous Power Capacity 1 | HF: 100 W LF biamp mode: 400 W LF triamp mode: 200 W (×2) | |||||||||||||||
| Recommended Power | HF: 200 W LF biamp mode: 800 W LF triamp mode: 400 W (×2) | |||||||||||||||
| Maximum Output (dB SPL at 1 m) Continuous / Peak | HF: 126 dB / 132 dB LF: 122 dB / 128 dB | |||||||||||||||
| Nominal Coverage | Horizontal 140 degrees Vertical: 10 degrees (single box) | |||||||||||||||
| Cabinet Type | Ported, elliptical / trapezoidal | |||||||||||||||
| Enclosure Material | HIPS (high impact polystyrene) with UV protectant | |||||||||||||||
| Finish | Available in black (WL2082-i BLK) or white (WL2082-i WHT) paintable | |||||||||||||||
| Grille | Perforated, formed aluminum | |||||||||||||||
| Connectors | 2 x NL-8 in parallel | |||||||||||||||
| Pin Outs |
| |||||||||||||||
| Attachment Points | Integral, side plate adjustable rigging system, vertical splay adjustable in 1° increments from 0° - 10° | |||||||||||||||
| Dimensions (HWD) inches | 11.8 x 27 x 13.4 | |||||||||||||||
| Dimensions (HWD) mm | 300 x 686 x 340 | |||||||||||||||
| Weight | 37 lb / 16.8 kg net 45 lb / 20.45 kg shipping | |||||||||||||||
| Accessories Available | FB2082-i: Fly-bar for WL2082-i, WL118-sw and WL115-sw. Available in black or white. EB2082-i: Extension bar, allows WL118-sw or WL115-sw to be suspended behind WL2082-i. Available in black or white. PB2082-i: Pullback bar for WL2082-i. Pulls the bottom of the array back to achieve the desired angle. Available in black or white. AB2082-i: Angle bracket, allows greater vertical splay between WL2082-i and WL118-sw or WL115-sw enclosures in ground stacked configurations. Available in black. Requires two brackets per array, sold individually. QRP-KIT-1: Kit of four quick-release pins for use in lieu of included bolts. |
All specifications are subject to change without notice.